Clay tile roof types: the main profiles and where each one leaks
The tile is tough. The underlayment, flashing and broken pieces are what let water in, and you can read most of that from the yard.
Clay tile roof types fall into three families: barrel (mission) tile, flat tile and interlocking tile. Each sheds water a little differently. In all three, the leak usually starts below or beside the tile, not in the clay itself.
The three main clay tile profiles
Barrel tile, often called mission or Spanish tile, is curved. Rows of cupped tiles carry water down, and rows of capping tiles cover the seams between them. It is the classic look on Southwestern and Mediterranean homes.
Flat tile lies in overlapping courses, a lot like shingles. Interlocking tile has ridges and grooves on its edges that lock one piece to the next. That shape resists wind-driven rain better than a loose overlap does.
- Barrel (mission): curved pans and caps, with gaps under the caps.
- Flat: overlapping courses, with a low profile.
- Interlocking: edge channels that lock tiles together.
Where the water actually stops
Clay tile is a rain screen, not a seal. Most water runs off the surface, but some gets under it. The real barrier is the underlayment beneath the tile, plus the metal flashing at valleys, walls and chimneys.
That layer ages out long before the clay does. A tile roof can look perfect while the felt underneath is tired. Age tells you little. Condition tells you more.
Signs of trouble you can read from the yard
Use binoculars from the ground. Look for these.
- Cracked or missing tiles, shown as dark gaps in a course.
- Slipped tiles that sit crooked.
- Broken or displaced ridge and hip caps.
- Stained or rusted metal at valleys and chimneys.
- Moss or heavy staining where water lingers.
A few broken tiles is a repair. A sagging line across many courses is a different problem, and it belongs with a structural professional.
Check the ceiling and attic on a dry day
Take a flashlight into the attic. Look at the underside of the deck for daylight, dark stains and damp insulation. Water often travels along a rafter before it shows. Note where the marks line up with a valley, wall or chimney.
Do not walk on clay tile
Clay tile cracks under a footstep, and the crack you cannot see becomes the next leak. It is also slick and steep. This blog does not give steps for working on the roof. Read working at height safely, and leave the climbing to a roofer who works on tile every week.
Which type is easier to repair
Honestly, it depends less on the profile than on whether matching tiles still exist. Older or unusual profiles can be hard to match. Ask a roofer whether they can source the same tile before you agree to a patch that will look odd for years. For a closer look at the repair side, see tile roof repair.
Questions to ask a tile roofer
- Which profile is this, and can you match it?
- Is the underlayment still sound, or only the tile?
- Can you show me photos of what you found?
- Is this a section repair or a full re-lay?
A roofer with real tile experience answers these directly. For help choosing one, see hiring a roofer.
Frequently asked questions
What are the main types of clay tile roof?
Barrel (mission), flat and interlocking. They differ in shape and in how they shed and lock together, but all rely on the underlayment below.
Where do clay tile roofs usually leak?
Usually at valleys, chimneys, walls and cracked or slipped tiles, or through aged underlayment. The clay itself rarely fails.
Can I walk on a clay tile roof to check it?
No. Clay cracks under weight and is slippery. Use binoculars from the ground and the attic, and let a tile roofer go up.
Is one clay tile profile better than another?
Interlocking tile resists wind-driven rain well. The right choice also depends on climate, roof pitch and whether replacement tiles can be matched.
Does a cracked tile mean I need a new roof?
Not usually. A few cracked tiles are a repair. Widespread damage or failed underlayment is when replacement is worth discussing.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- NRCA. National Roofing Contractors Association
- US OSHA. 1926.501, Duty to have fall protection (OSHA)